VMdamentals.com

Archive for the ‘VMware’ Category

This year the dutch VMUG event (see www.vmug.nl) is surely going to be a great success. Again! For the first time I’ll be there as a blogger. Even better, last week I had a nice discussion with someone at IBM. They welcomed me to deliver 20-30 minutes of their presentation at the VMUG2010 event!

So be sure to visit the VMUG 2010 event, and especially the 15:50 – 16:50 session “Van Virtualisatie tot Cloud Computing: portfolio en praktijk” because I’ll be presenting there, and it is going to be really interesting too! Read the rest of this entry »

VMware’s VMmark (I have also read the name being VMark though?) has been around for a long time. It is software which creates “tiles” of workload on a physical server using several virtual machine workloads. It then adds tiles to the hardware platform, until its resources run out. Now version 2.0 is out!

Read the rest of this entry »

Some people have asked me how to actually create the 3D graphs from the vcsiStats tool. I use a simple Excel sheet for this. Using the script I described in vscsiStats into the third dimension: Surface charts! , you can import the files outputted into excel and see the Excel chart instantaneously.

The vscsiStats tool is a very powerfull vSphere utility. It allows you to see virtual disk performance (such as latency, IOPS block sizes etc). The script I used in part 1 and in part 2 of this series will shoot multiple samples of these values right after each other, which you can then import into Excel to produce surface charts, like this one:

How to create graphs like this is described in detail below. Read the rest of this entry »

Is it a new miss election?? Well, after doing more than a little testing I figured out I may be MISSing something… So unfortunately it is not about beautiful women, but yet another technical deepdive. This time into misalignment. Theoretically it is SO easy to point out what the problem is (see Throughput part 3: Data alignment. For this new blog entry I had my mind set on showing the differences between misalignment and alignment in the lab… However this proves to be much MUCH harder than anticipated…

Read the rest of this entry »

New and improved in vSphere: Datastore alarms. Very nice to have, but some of these alarms are so generic, that datastores are simply always in an alarmed state. Errors like “non-VI workload detected” on your ISO LUN, “Datastore usage on disk” and so on. Here’s how to loose these errors on certain stores while enforcing them on others.

Read the rest of this entry »

Amongst many of the optimizations for virtual desktops, it is always stated that the LSI Logic virtual disk controller is faster/more efficient than the BusLogic controller. So is this really true in vSphere 4.1 environments?

Read the rest of this entry »

Today I got my hands on the new PHD Virtual Backup Appliance – version 5.1-ER. Following in the footsteps of its XenServer brother, this new version uses a single VBA (versus the previous versions where multiple VBA’s were used). Best of all: ESXi support at last!

Read the rest of this entry »

Some time ago I posted Surviving total SAN failure which I had tested on ESX 3.5 at the time. A recent commenter had trouble getting this to work on a vSphere 4.0 environment. So I set out to test this once more on my trusty vSphere 4.1 environment.

Read the rest of this entry »

In this post: Throughput part 2: RAID types and segment sizes I wrote that a RAID5 setup can potentially perform better in a heavy-write environment over RAID10, if tunes right. While theoretically this might be true, I have some important addendum’s to this statement that vote against RAID5 which I’d like to share.

Read the rest of this entry »

This year on December 10th I’ll be visiting the Dutch VMUG day 2010 in Nieuwegein, the Netherlands. My first time as a blogger! I will be visiting this event for the fourth time, and it has been a great event every single year.